Power Acoustik PADVD-220T Car Video System User Manual


 
Page -22
Troubleshooting guide
Symptom Cause Solution
General
No power
The car ignition is not on.
The fuse is blown.
If the power supply is properly connected to the
car
accessory switch the ignition key to “ACC”.
Replace the fuse.
Disc
Disc cannot be
loaded.
Presence of disc inside
the player
Remove the disc in the player then put a new
upward.
Disc cannot be
read.
Inserting the disc in
upside down.
Compact disc is
extremely dirty or
defective.
Temperature inside the
car is too high.
Insert the compact disc with the label facing
upward.
Clean the disc or try to play a new one.
Cool off until the ambient temperature returns to
normal.
No sound
Volume is in minimum.
Wiring is not properly
connected.
Adjust volume to a desired level.
Check wiring connection.
The operation
keys do not
work.
The built-in
microcomputer is not
operating properly due to
noise.
Front panel is not properly
fix into its place.
Press the RESET button.
Reinstall the front panel.
Sound skips.
The installation angle is
more than 30 degrees.
The disc is extremely dirty
or defective.
Adjust the installation angle to less than 30
degrees.
Clean the compact disc/try to play a new one.
The radio does
not work, the
radio station
automatic
selection does
not work.
The antenna cable is not
connected the signals are
too weak.
Insert the antenna cable firmly select a station
manually.