Power Acoustik PD-710 Car Video System User Manual


 
10
REMOTE CONTROL
1. MODE button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), TV (For PD-710T) and AV IN.
2. POWER
Power on or off
3. BAND/ RDM button
In Radio mode, press it to change radio band in sequence of FM1 → FM2 → FM3 → AM1
AM2. In DVD mode, press it to play randomly.
4. ENTER button
Press it to confirm selection or setting.
5: Cursor / / / buttons
Use the / / / buttons to select the menu item. the title, track or to show next frame.
6. EJECT button
Press it to eject the disc.
7. STEREO/MONO button
Press STEREO button to select STEREO or MONO.
8. P.SCN/ RPT button
In SD CARD/ USB mode, press to repeat REP 1 => REP DIR => REP ALL
In DVD mode, press to start repeat REP OFF=>REP Chapter=>REP Title=>REP Off.
In Radio mode: PS (Preset Scan): Press to scan all preset stations in the memory of the current
band and stay on each memory stations for about 5 seconds.
AS (Auto Save): Long press to save the stations with good reception automatically.
1: MODE
2: POWER
3: BAND/RANDOM
4: ENTER
5: UP/DOWN/LEFT/RIGHT
6: EJECT
7: STEREO/MONO
8: P.SCN/RPT
9: BACKWARD/SEEK-
FAST BACKWARD
10: LOUD
11: OSD
12: PBC/STOP
13: Digit numbers
14: Play/Pause
15: MUTE
16: MENU
17: SUBTITLE
18: SETUP
19: ANGLE
20: INT
21: VOLUME PLUS
22: A-B/ZOOM
23: SEL
24: FORWARD/SEEK+
FAST FORWARD
25: VOLUME MINUS
26: AUDIO/GOTO
27: DUAL (Option without function)
28:OPEN/TILT (Option without function)