Power Acoustik PD-710 Car Video System User Manual


 
9
3 VOL+ button
Press to increase volume level.
4. POWER/MUTE Button
Press it to turn on the unit, press it again to turn the unit off.
Short press it to MUTE the volume output, press it again to resume volume when the power is
on.
5. MODE Button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), TV (for PD-710T) and AV IN.
6 Band buttons
In Radio mode, press it simply to change radio band in sequence of FM1 → FM2 → FM3 →
AM1 AM2.
7. USB slot
USB slot, for Multimedia playback files only. Insert a USB into this slot and the unit will
automatically start reading and playback the card. * Supported Music File Format: MP3, WMA
Files
8. AV-in Jack
Put the AV plug into the AV-IN jack which was marked on front panel.
9 Release Button
Press to detach and release the front panel. When the unit released it will switch off
automatically after a few second. Detach/Attach the Panel: Press REL button and pull out the
left side to detach the panel. To attach it, insert the right side first and then press the left side
until hear a click sound.
10. Disc Loading slot
Insert the disc with the printed side facing upward into the slot.
11. Info Display
Information Display LCD when operation the unit.
12. EJECT Button
Press it to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is
reinserted automatically.
13 RESET Button
Press it with a thin, sharp object. The device will then be reset to factory default settings.
14. Anti-Theft LED
15. SD/MMC Slot: Insert a Memory card.
SD/MMC card slot, for Multimedia playback files only. Insert a SD/MMC CARD into this slot and
the unit will automatically start reading and playback the card. * Supported Music File Format:
MP3, WMA Files]