Filter
Top Products
19
CROSSOVER CONNECTIONS AND INPUT SWITCH SETTING
Route the wires connected to the input terminals on the crossover network to the
power amplifier. Connect the wires to the amplifier outputs as recommended by
the manufacturer of the unit. Make sure there are no stray strands of wire which
could cause a short circuit. Observe left/right polarity markings.
7ZHHWHU
:RRIHU
&URVVRYHU
,1 287
:RRIHU
7ZHHWHU
:RRIHU
7ZHHWHU
6WDQGDUG
6ZLWFKLQ3DUDOOHO3RVLWLRQ
%LDPS3DUDOOHO
Amplifier
NOTE: In this configuration, you may connect the amplifier (+) positive to either
the tweeter (+) or woofer (+) terminal, and the amplifier (-) negative to either the
tweeter (-) or woofer (-) terminal. The parallel switch ensures that both halves of
the crossover are supplied with signal as least one (+) and (-) input terminal are
connected.