Pure Digital SONUS-1XT Car Stereo System User Manual


 
15
Tuning
Tuning SONUS-1
XT
is very simple. When you first switch on it automatically finds
all the stations available in your area. You may want to re-tune if you move your
radio to a different room or if you want to receive a new multiplex. Multiplexes,
sometimes called ensembles, are groups of stations owned and broadcast by a
single operator. You can re-tune your SONUS-1
XT
at any time using the following
three tuning options:
Autotune UK
Scans all UK frequencies. This should only take a few seconds.
Autotune full
Scans the full frequency range in Band III. This is useful if you use your
SONUS-1
XT
outside the UK and may take a minute or more.
Manual tune
Shows signal level, which you can use to find the best position for your radio
and aerial.
1. Turn the Tune knob to scroll through different channels and push to choose
one (UK stations are in channels 11B to 12D). You see a signal level
display.The empty block indicates the minimum required level for reception
and the filled blocks indicate the current level.