Filter
Top Products
In DVD mode, when the disc is playing or
in stop mode, press button (32) to
enter setup menu.
1. When the cursor is on the topside, use
◄/► buttons to move between the
different pages.
2. Press button to move the cursor to
the setup page below and then you can
use buttons to move between the
different setup options.
3. Press ► or ENTER button to move to
the choice list of each setup option and
then use buttons and button
to change your selection.
4. When the setting is complete, press
button (32) to return to normal
mode.
When you open the setup menu, you will
see the system setup page at first, see
below:
TV SYSTEM is used to select the TV
output mode. This player can play discs
recorded in either PAL or NTSC formats.
Select NTSC format, when the unit is
connected to NTSC TV.
Select PAL format, when the unit is
connected to PAL TV.
Select AUTO format, the player TV output
Change the TV mode among NTSC, PAL
SETUP
ENTER
SETUP
▼
▲/▼
,
▲/▼
* When settings are changed, old settings
are overwritten. Make a note of the
current settings before making changes.
If the vehicles battery is disconnected,
the settings will be cleared and will return
to the factory settings.
TV SYSTEM
Setup
System Setup
and AUTO. The default setting is NTSC
format.
Change the SCREEN SAVER on or off.
Use the procedure described below to set
the output screen according to the type of
TV monitor being used.
For some discs, the picture may not be
set to the selected screen size. (For
details, refer to the explanation on the
disc's jacket.)
Select this when connected to a
conventional 4:3size monitor. The picture
will fill the entire TV screen. However,
due to the mismatch in aspect ratio, parts
of the movie at the extreme left and right
sides will not be visible (when playing a
16:9 size movie).
This is selected upon shipment from the
factory.
Select this when connected to a
conventional 4:3 size (normal TV aspect
ratio) monitor. There may be black bands
visible at the top and bottom of the
screen (when playing a 16:9 size movie).
The width of these stripes will depend
upon the original aspect ratio of the
theatre release of the movie.
Select this when connected to a wide
screen TV.
SCREEN SAVER
SETTING the TV TYPE
Setting contents: 4:3PS /4:3LB /16:9.
4:3 PS (PAN SCAN)
4:3 (LETTER BOX)
16:9
15
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP