Filter
Top Products
14
7. APS, DISPLAY FUNCTIONS (using the SELECT knob)
In Radio mode, swing the SELknob briefly in theAPS/DISP direction , the radio
briefly plays all the preset stations of the frequency band .
In Radio mode, swing the SELknob in direction of theAPS/DISP for approximately
2 seconds to active automatic station storage. The radio searches within the
current frequency band, e.g. Fm1, for the stronger signal level until the search
cycle has finished . The six strongest stations are then allocated tothe correspo-
nding storage locations . Then the station of the first storage locationis set .
Scan Function
Automatic Preset Setup
Display ON/OFF Function:
In Disc mode, swing the SELknob briefly in the direction of APS/DISP to turn off
the display image (the monitor on the unit only) , the sound will stay on.
(Swing it again to resume the playback picture mode.) You can press SELknob
briefly to select the “BG COLOR” by repeatedly pressing the SELknob, then
rotate the VOL+/- to select the background color among of the “AUTO,
BG COLOR: 01........BG COLOR: 11”, in “AUTO” mode, the monitor of unit will
change the background color automatically.
8. MU (MUTE) BUTTON
Press this button briefly to turn off the audio. Press againto restore the volume to
prior level. You can also disable the MUTE function by turning the VOL+/- knob.
9. ANGLE (Screen position)
This button allows you to change the angle of the screen module in four steps.
Press this button repeatedly to cycle through the different positions.
Control Panel
10. /CH 1-6 BUTTON(RADIO PRESET)
a). In Disc Playback Mode
Press this button to pause playback, press it again to resume playback.
b). In Radio Mode
Press this button repeatedly to preset station. With this system a total of 30
stations can be stored in the memory .
The operation as below:
- store in memory
press and hold the desired memory location for several seconds, the current
listening station will be stored into the number location.
- retrieve a preset station
press it button repeatedly to retrieve a station which had been stored in the
memory in advance the chosen number is shown on display.
11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)
a) In DISC, USB mode:
if you wish to jump forwards or backwards press the SELbutton (4) briefly in
the or direction. (Note: in DVD mode, press the SELbutton continually
twice in direction to skip back one track during playback.)
To wind through the tracks keep the SELbutton pressed in the or direction
for about 2 seconds. FF X2 appears in the display. Operating the SEL button
again,