Filter
Top Products
Function Characteristic
DVD Player Features
1. Fully Compatible
Fully compatible with most of the
discs on the market.
Please refer to the list on page 5 for
details.
2. Intelligent Disc Upgrade
Support the intelligent disc upgrade
function to keep up with the market
competition.
4. Unique HDCD Function Support
Support HDCD function. HDCD, the
abbreviation of High Definition
Compatible digital, which is a
recording/playing technology that
improves the CD audio quality. It is
able to restore 20Bits audio data truly
to enhance the quality and quantity
of the digital audio in the highest level.
At the same time, it is also compliant
with the ordinary audio data of the
CDDA format .
5. Support Picture CD and Photo CD
The unit is compatible with the
Picture-CD and Photo CD player,
without requiring other support from
additional software. It will activate
the media player menu to process
automatically. (In other words,playing
automatically.)
6. Support DVD Audio
The unit is fully compatible with the
high-quality audio DVD Audio discs,
without requiring the support from
additional software. It will enable the
end-users to enjoy an excellent audio
effect.
7. Support DVD-R
The unit is compatible with the
DVD-VR discs recorded by the DVD
player equipped with the recording
function.
-4-
-25-
3. Single Chip
Integrate the servo and MPEG2
chips to enhance the stability and
achieve the high-performance level.
8. Car back video input function
This unit includes car back video
input function. (When car back
camera connects this player), during
the operation of car backing, this
player changes from play mode to
car back video input mode
automatically. Then the screen shows
you back view, it protects you more
safety.
Problem
Action
Remote Control
does not worke
properly.
Point the Remote Control at the sensor of the DVD
video player.
If the batteries in Remote Control are exhausted,
please replace them with new ones.
Fails to play disc
Please insert the disc to play.
No disc is inserted. ( No disc symbol appears on
screen)
The disc is placed upside down. Turn it over, place
it correctly (disc label upward).
The disc is dirty. Please clean it.
There may be humidity inside the unit. Please turn
on the power and for 30 minutes in no disc running
mode.
The player fails to
play from the
beginning.
Because the playing mode is in Program/Random
/ Repeat mode , press these relative function
buttons again to return to playing mode. ( Please
refer to the Advanced operations part.)
While the DVD Title/Chapter or DVD Setup menu
is displaying on monitor, or while playing VCD
with PBC function, the Installation menu will be
displayed on monitor.
Stop playing
automatically
Dying
Some discs have memorized the pause command
automatically in the original record. So the unit
will stop playing automatically at this memorized
command part.
It is a normal phenomenon that the unit dying
occasionally during operation. Press RESET button
to restart the unit.
Operations
Remote Control
does not worke
properly.
Remove the obstacle between DVD player and
Remote Control.
The operating distance of Remote Control is too far
from the sensor of DVD video player. Operate it
within the valid distance.
Troubleshooting