Filter
Top Products
15
Connecting with Cable Box
If your cable system only requires you to use a converter box for some channels
(i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable.
Plug this cable into a splitter (available at your local electronics store.)
Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box.
Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal
on an A/B switch available at your local electronics store.)Connect a third RF cable between
the OUT terminal on the converter box and the B-IN terminal on the A/B switch.
Connect a RF cable between the OUTterminalon the A/B switch and the ANT. IN on your DVD-VIDEO.
When the A/B switch is in the B position,use the converter box to change channels ; when the A/B switch is
in the A position, use the DVD-VIDEO to change channels.
How to watch general broadcasting with recording CATV
CHECK UP!
1. Set Channel Select switch of Converter Box to CH 3 or 4 as same as video
exclusive channel. Press [SET] button in [VCR] operation to set video exclusive channel
in CHANNEL SET screen.
2. Press channel button of Converter Box to select channel to be recorded. In this case,
if you want to watch CATV to be recorded, press [TV/INPUT] button of TV to select Out(VCR) .
3. Press [REC] button in DVD-Video.
4. To watch general broadcasting, press channel button in TV to select the desired channel.
For some types of TV, you should press [TV/INPUT] button in TV REMOTE and convert from Out 1
( VCR 1) or Out 2(VCR 2) mode to Broadcasting Channel mode to change TV channel.
Change channel selection of CATV receiver in recording, contents of recording is changed.