Filter
Top Products
39
Symptom
While recording and playing, the
top of screen extremely waves.
A screen is not clear.
A screen at pause is trembling or
slow screen is not clear.
- a Since VCR Play signals are not stable like a TV signals, screen
Checks
- a In case videotape is the one recorded by other products or old
one, stripe may appear on the screen.
- a Try to adjust the screen by [TRACKING+/-] button
- a Try to use a head-cleaner.
In spite of pressing CHANNEL ,
a channel can not be set.
- a You may not memorize channels.
- a Please check your channel setting or press a number button.
While duplicating, screen is not
clean and distorted.
- Try to use a head-cleaner.
- a Try to adjust the screen
Recording a TV program is
impossible.
- a For recording, you should use videotape with a tab.
- a Please check whether a channel is fixed on video. If not, you
have to turn it into TV by pressing OUTPUT button.
- a Are RF cables inputted antenna connection terminal correctly?
- a Does a CH number selected in display section appear?
- a Please check a tab on a tape whether it is broken or not. (If it was
broken, please scotch-tape it)
- a Check whether a tape attached with a recording tap is inserted.
- a Check whether the screen is displayed in VCR Only Channel.
Press [OUTPUT] button in this remote controller to adjust in
"General Broadcast" condition.
- a Is the rounded line (RF cable) connected in "ANT.IN" terminal?
- a Is the selected channel number shown in Display?
- a Is a tab of cassette tape broken? (Please cover a tab hole with
cellophane adhesive tape (Scotch tape).)
remote control does not work.
- a Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be
duplicated in a good condition.
Buttons on remote control do not
work.
- a Battery may be weak or exhausted.
- a A receiver of remote control may be different with a sender.
- a In case a videotape is positioned in the beginning, VISS REW
and REW do not work.
- a In case a videotape is positioned in the end, FF , VISS FF ,
PLAY and REC do not work.
- a Please check whether another button is pressed.
Cable broadcasting can not be
selected.
- a Please select CABLE not NETWORK from the CHANNEL
SETTING .