PYLE Audio PLDVD140 Car Stereo System User Manual


 
PROGRAM
In stop mode, press PROGRAM button,
the screen will display PROGRAM
P00:00. For example: press numeric
button 4 and button, PROGRAM
P01:04 appears. It means track 4 will be
played first.
AV IN Selection
You can connect an audio/video device
to the unit through the AUDIO/VIDEO
INPUT jacks on the front panel.
Press SOURCE button on the front panel
to access AV IN mode and the indicator
light for AV INPUT will illuminate. Press
SOURCE button again to return DVD
mode and the indicator light goes out.
Volume Level Adjustment
Press VOLUME +/- on the front panel or
VOLUME +/- on the remote control to
increase or decrease the volume level.
Remote Sensor (IR)
Point the remote handset to the remote sensor
on the front panel. Receive the signal from
remote handset.
Turning the player on/off
Press the button on the front panel or
press button on
remote control to turn
the player on or off.
16
A-B
A-B repeat allows a passage to be
repeated continuously. Press A-B button
at the start of the required passage, then
press A-B button again at the end of the
passage. To revert to normal playing,
press A-B button again. Each time the
button pressed, the screen will display
as follows:
A TO B SET A A TO B SET B A TO B CANCELLED
Disc Search (GOTO)
FOR DVD
Press GOTO button twice, the screen will
display the following message:
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
FOR VCD (WITH PBC OFF)/CD:
Press GOTO button once, the screen will
display the following message:
Use numeric buttons to input the time
directly.
ZOOM
Allows the picture to be incresed or
decreased in size. Press ENTER to
toggle among 1.5 scale, 2.0 scale and
3.0 scale.
RANDOM
Press RANDOM button, track selection
will be made in random order. The display
screen will show SHUFFLE ON on the
right-top corner. Press RANDOM button
again, SHUFFLE OFF appears and
release the mode.
TITLE 01/01 TIME -- : -- : --
00:00:25
GOTO -- : --
00:00:25
BASIC OPERATION