Filter
Top Products
8
EN
Applications
The KW Series has been primarily designed for portable audio reinforcement. This includes a variety of uses in reinforcement for entertainers and
presenters. The KW122, KW152 and KW153 are all designed to perform well on their own in full-range audio. They can be used singly, in stereo pairs
or in distributed or delayed systems. The KW122 may also be used as a stage monitor.
WARNING! The KW Series loudspeakers weigh 49 lbs and up. Use proper lifting techniques and safety precautions when mounting
on loudspeaker poles. Refer to the Specifications section for the individual weights.
The KW122, KW152, and KW153 are equipped with a 35 mm pole socket that allows use on a speaker stand or on a pole over a KW181 subwoofer.
The pole socket on the KW122 and KW152 features the QSC Tilt-Direct™ system for tilting the enclosures down 7.5° while on a pole. The pole socket
on the KW153 does not allow tilting.
WARNING! When suspending the loudspeakers, installation must be accomplished by or under the supervision of a licensed installa-
tion professional. All applicable building codes must be followed.
The KW122, KW152 and KW153 have M10 threaded inserts for suspension with eyebolts.
For extra low-frequency extension and enhancement, the KW181 is perfectly matched to the rest of the KW Series. The KW122, KW152 and KW153
all have a 100 Hz high-pass filter for use with the subwoofer. The KW181 includes a fixed low-pass filter so it will accept full-range input. The KW181
has four large casters for maximum portability. The pole socket on the top of the enclosure is fitted with an M20 threaded insert. The included speaker
pole screws into the socket for a secure fit.
KW122 in Monitor Position
KW122 On Stands
KW152 Mounted on KW181
46"
(1168 mm)