Filter
Top Products
7
RADIO OPERATION
• BAND SELECTION
At radio mode, press BAND button
(13) to select the desired band.
The reception band will change in the
following order:
• STATION SELECTION
- Manual Tune Up/Down
Repeatedly press the
TUNE/TRACK/SKIP button (16)
or TUNE/TRACK/SKIP button (17)
for manual tuning frequency
downward or upward.
- Seek Tune Up/Down
Press and hold the
TUNE/TRACK/SKIP button (16)
or TUNE/TRACK/SKIP button (17)
for several seconds for auto tuning
frequency downward or upward.
• LOCAL/DISTANT
Press LOC button (1) shortly to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. In local
mode, “LOC” will display.
• MONO/STEREO
At FM radio mode, press MO/ST
button (8) to set the reception between
mono mode and stereo mode. In stereo
mode, when stereo broadcasting
station is received, the “ ” indicator
will appear upon the display.
• AUTOMATIC MEMORY STORING &
PRESET SCAN
- Automatic Memory Storing
Press AS/PS button (14) over 1
second in radio mode, Auto Store is
started. Stations are searched
automatically from next frequency
and detected station is stored into
the preset memory. In case of LOC
state, the first Auto Store is done by
LOC state and if 6 CH is not fully
memorized, the seconds Auto Store
search continued by Distant state.
At the end of Auto Store operation,
mode is change to Preset Scan.
-Preset Scan
Press AS/PS button (14) shortly in
radio mode, Preset Scan is started.
This operation starts from next
preset number and finished at the
same preset number of which last
channel memory stored.
Frequency of preset memory is
displayed with blinking for 5
seconds. Press AS/PS button (14)
again to release this function.
•STATION STORING
Press and release any one of the
preset buttons (18) (1 - 6) shortly,
(1 - 6) preset memory is called (Preset
Call). Press the button for several
secnds, current frequency is stored
into preset memory and preset number
(1 - 6) is displayed (Preset Store).
CASSETTE OPERATION
• PROGRAM BUTTON
These two buttons (25) perform the
dual functions of changing the
direction of tape playback and fast
forward/rewind of the tape.
- Change Tape Playback Direction
Press both buttons together to play
the other side of a tape.
- Fast Forward/Rewind
Press the button with the double
arrows pointing the same direction
as the direction indicator in the LCD
to fast forward; press other button in
the opposite direction to fast rewind.
• EJECT
Push the eject button (24) down to
eject the cassette tape.
• CASSETTE COMPARTMENT
Insert a cassette tape into the cassette
compartment (26). The cassette
mechanism will load it in play mode.
OPERATION
FM1 FM2 FM3 AM1 AM2