Filter
Top Products
Steps For Installing Sun-visor with Shroud
Setup work
Remove the visor and set it in an uncluttered
work area. Pay appropriate precautions to
ensure that it is not damaged during the installation.
Measurements
Press push on the headliner with your fingers to make
sure there are no obstructions that would hinder
the installation. Use paper template to mark the
area to be cut.
Cut the visor
Use an adjustable-depth blade, start
your cut 1/4 inch inside one corner and
cut diagonally across, stopping 1/4 inch in
from the other corner. Repeat this procedure
for the other two corners.
Removefoam&obstructions
Carefullypeeloffthematerial.Setthe
adjustablebladetooneinchdepthandcut
aroundtheedgesofthehole,staying1/4inch
insidetheedge.Pulluponecornerofthefoam
andusethebladetocutunderneath.Remove
smallsectionatatime,ensuretobethe
uniformdepth.Useadremelorotherappropriate
toolstoremoveotherobstructions.Insertthe
monitortomeasurethefitandmake
adjustmentifnecessary.
CAUTION:makesurethescrewsarenotlongenoughtogothrough
thevisor!
Ifyouhaveanydoubtsaboutthistypeofinstallation,pleaseconsult
yourlocalmobileelectronicsretailer.Cuttingandmakingholesin
thevisorwillcauseelectronicdamagewhichisexpensivetorepair.
9