Filter
Top Products
CAUTION:makesurethescrewsarenotlongenoughtogothrough
theheadrest!
Ifyouhaveanydoubtsaboutthistypeofinstallation,pleaseconsult
yourlocalmobileelectronicsretailer.Cuttingandmakingholesin
theheadrestwillcauseelectronicdamagewhichisexpensivetorepair.
Setup work
Remove the headrest and set it in an uncluttered
work area. Pay the appropriate precautions to
ensure that it is not damaged during the installation.
Steps For Installing Headrest with Shroud
Measurements
Press the headrest with your fingers to make
sure there are no obstructions that would hinder
the installation. Use paper template to mark the
area to be cut.
Cut the headrest
Use an adjustable-depth blade, start
your cut 1/4 inch inside one corner and
cut diagonally across, stopping 1/4 inch in
from the other corner. Repeat this procedure
for the other two corners.
Removefoam&obstructions
Carefullypeeloffthematerial.Setthe
adjustablebladetooneinchdepthandcut
aroundtheedgesofthehole,staying1/4inch
insidetheedge.Pulluponecornerofthefoam
andusethebladetocutunderneath.Remove
smallsectionatatimeandensuretobethe
uniformdepth.Useadremelorotherappropriate
toolstoremoveotherobstructions.Insertthemonitorto
measurethefitandmakeadjustmentifnecessary
7