RCA DRC69705 Car Video System User Manual


 
20
Use Default Settings
1. Press the SETUP button in stop mode.
2. Press the / button to select Misc.
3. Press the button, then press the / button to select
“UseDefaultSettings”dialoguebox.
4. Press the ENTER button, then press the / button to
select “Yes”.  Press the ENTER button and the original
setting will be restored. The unit will exit the default
setting menu automatically and re-load the disc in the disc
tray.
Note: It will take 3-5 seconds to reset the DVD player to the
factory default.
Screen Saver
1. Press the SETUP button in stop mode.
2. Press the / button to select Misc.
3. Press the button, then press the / button to select
Screen Saver.
4. Press the ENTER button, then press the / button to
change the On/Off mode.
5. Press the ENTER button.
6. Press the SETUP button or RETURN button to exit the
menu.
MISC
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• DoNOTtouchthesurfaceoftheunlabeledsideofthedisc.
• DoNOTstickpaperortapeonthesurface.
• DoNOTexposethedisctodirectsunlightorexcessiveheat.
•Cleanthediscbeforeplayback.Wipethediscfromthecenteroutwardwithacleaning
cloth.
• NEVERusesolventssuchasbenzineoralcoholtocleanthedisc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause
malfunctions.
Cleaning the Unit
• Besuretoturntheunitoffanddisconnectthepowersourcebeforemaintainingtheunit.
• Wipetheunitwithadrysoftcloth.Ifthesurfacesareextremelydirty,wipecleanwithacloththathas
been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe with a dry cloth.
• Neverusealcohol, benzine,thinner,cleaninguidor otherchemicals.DoNOTusecompressed airto
remove dust.
Important Note
• Beforetransportingtheunit,removeanydiscfromthedisccompartment.
Customizing the Function Settings
Maintenance
ENGLISH IB.indd 20 6/24/2009 10:19:18