Filter
Top Products
7
EN
Settings
6
EN
Settings
Showing Demonstration
Press DIMMER / DEMO to turn on/off
demonstration in standby mode. The
demonstration scrolls through all display
operations.
Setting the Clock
1. Press and hold CLOCK until the hour flashes
on the display.
2. Press DIGITAL TUNING or to set the
hour and then press CLOCK to shift to minute
digits.
3. Press DIGITAL TUNING or to set the
minute.
4. Press PROG•SET to save settings or STOP
to quit setting.
Setting the Timer
1. Press and hold TIMER until the ON and clock
hour flashes on the display ( ON - timer on
time ).
2. For setting time, press DIGITAL TUNING
or to set the hour and then press TIMER
to shift to minute digits.
3. Press DIGITAL TUNING or to set
the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3
for timer off time setting.
5. Press TIMER to select source. Press DIGITAL
TUNING or to select between CD /
TUNER .
6. Press TIMER to set volume. Adjust VOLUME
CONTROL to select desired volume level.
7. Press PROG•SET to save settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
Adjusting the Display Brightness
1. Press and hold DIMMER/DEMO for more than
2 seconds.
2. While the current dimmer level is displayed,
press and release DIMMER/DEMO repeatedly
to select the desired level (DIMM 1 - 3).
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15 and 5 minutes.
The icon lights on the display when sleep
mode is activated.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to
view remaining sleep time.
Adjust Sleep Time
Press SLEEP again when the remaining sleep time
is displayed to change sleep time.
Note:
Sleep is automatically de-activated when
the unit is turned off.
Sound Features
Volume Control
Press VOLUME CONTROL or on the main
unit or press VOL or on the remote
control to adjust volume level. The bars on the
volume display increases and decreases to show
the change in volume level.
Bass Boost
Press BASS BOOST to turn on/off boosting the
bass frequency. The BASS icon lights on the
display when it is activated.
Muting Audio
Press MUTE on the remote to cut the sound.
(Remote Only)
Using Preset Equalizer Curves
Press EQ to toggle among FLAT, ROCK, POP, JAZZ,
CLASS and CUSTOM. The display shows your
selection briefly.
Creating a Custom Curve
1. Press EQ to select CUSTOM mode.
2. While CUSTOM is displayed, press DIGITAL
TUNING or to cycle among
displayed bass- and treble - range levels.
3. While BAS or TRE is displayed, adjust
VOLUME CONTROL to set the associated gain
between -10 - +10.
RS2654_EN(Canada) 2/7/06 3:28 PM Page 12