Filter
Top Products
7
MOUNTING THE RFA-44, 54 AND 64
MID-RANGE/WOOFERS
1. Cut the proper size hole for the midrange/woofer.
• For the RFA-44, cut a 4" (101.6mm) diameter hole
• For the RFA-54, cut a 4-15/16" (125.4mm) diameter hole
• For the RFA-64, cut a 5-27/32" (148.4mm) diameter hole
2. Place the mounting ring over the mounting hole and mark the
location of the mounting holes.
3. Remove the ring. Drill the holes for the screw clips using an1/8" bit.
4. Route the wire through the hole.
5. Install the screw clips over the holes. Place the mounting ring over
the hole.
6. Attach the wires and be sure to observe proper speaker polarity.
7. Place the speaker into the hole and screw into place.
8. Press the speaker grille into the mounting ring.
Midrange/
Woofer
Mounting
Ring
Cut-Out
Grille
Mounting
Hole
Screw
Clips
Exploded View