Filter
Top Products
11
USING THE WATER DISPENSER (OPTION)
With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In
addition, you can save electricity by reducing the number of times the door is opened by more than 30%.
Push lever
Locking device
Water tank cap
Water tank
Water supply device
INSTALLING THE WATER TANK
FILLING THE WATER TANK
Overview
OPEN
OPENLOOK
LOCK
1
Fix the water supply device tightly into the fixing hole.
• The door will not be closed automatically when the water
supply device is pulled out for a long time because of cold
leaking.
2
Place a separate spare beverage bottle in the location
of the exclusive water tank.
• Two 1.5 litre bottles can be used.
3
Set the locking device to “LOCK”.
• If the water supply device is only fixed to the fixing hole
and the locking device is set to “OPEN”, the water supply
device can be removed from the fixing hole.
1
Open the water tank by removing the round cap and fill
it up with drinking water.
• Fill the tank up to the full level (just over 4.2 litres).
2
Replace the round cap by pushing down on it until it
clicks into place.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 11