Filter
Top Products
12
OPEN
OPENLOOK
LOCK
3
Check that the locking device is set to “OPEN”.
• Water is only dispensed if the device is set to “OPEN”.
4
Place a cup on the cup support, then press the
PUSH lever.
INSTALLING A REGULAR BOTTLE
1
Press the fixing lever, lift the exclusive water tank
upwards, then remove it.
2
Remove the water supply device from the exclusive
water tank, then set the inner groove of the water
supply device in a regular spring water bottle and fix it
in position by turning it.
3
Turn the water supply device over, then fix it in
position in the fixing hole.
• If you do not want children to use the dispenser, set the locking device to “LOCK”.
• Gurgling sounds may be heard when air enters the water tank from regular mineral water or
beverage bottles.
• Some regular mineral water or beverage bottles may not fit the water supply device, depending
on their size.
• If water does not come out satisfactorily when you press the “push” button, press it again.
• Do not use carbonated drinks, such as cola, cider or sodas. When you press the button, the
beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of
beverage bottle.
• Use bottled mineral water or boiled tap water that does not contain any particles.
Note
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 12