Filter
Top Products
5
1. The LCD display will have a Standby light to show there is power.
2. Control buttons (bottom edge of cabinet)
Menu/F button: rotate between contrast, Brightness, color,
sharpness and OSD language (F/OK on remote control has the
same function).
Input/ OK button: s
witch between AV1, RGB, AV2, AV3, HDMI
and PC mode.
ed buttons: adjust options selected from Menu/F
4 button: To switch from display to standby mode (to switch off,
completely disconnect the monitor from the power supply)
Many of your monitors functions are controlled through the menu
function.
During menu operation, the bottom of the screen will show which
controls can be used.
Press the u button to enter the main menu.
A sub menu is selected using the e or d button and pressing the
8 button when the required sub menu is highlighted.
When you have set a Sub menu you can press the MENU button to
exit, then the MENU button again to exit the main menu.
1. Press the MENU button. Select Picture using the e or d button.
Press the 8 button to enter.
Set the picture settings for your “personal” preference.
2. Use the e or d button to select e.g. Brightness and the 7 or 8
button to adjust levels.
3. Preset : You can select either your “Personal” settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture ‘noise’
(granular appearance) being experienced by Using 7 or 8 to select
between Mid / Max / Auto / Min / OFF.
5. Dynamic skin tone: May be used to enhance skin tone by Using
7 or 8 to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by Using 7 or 8 button to
select between Min / Mid / Max.
To exit press the MENU button.
✐ Your personal settings are automatically saved when you exit the
menu.
Terminals
INST
INST
ALLA
ALLA
TION
TION
1
2
Picture menu
Brightness
Contrast
Colour
Sharpness
Preset Personal / Dynamic / Standard / Eco
Noise Reduction Mid / Max / Auto / OFF / Min
Dyn. Skin
Text Brightness Max / Mid / Min
Tone ON / OFF
Child lock OFF / ON
Timer
Off Time ON / OFF
AV2 setting
RGB, H/V / Y Pb Pr
Picture
: Select
: Adjust
MENU
: Back
Brightness
Contrast
Color
Sharpness
Preset Personal / Dynamic / Standard / ECO
Noise Reduction Mid / Max / Auto / / OFF
Dyn. skin tone ON / OFF
Text Brightness Min / Mid / Max
Min
DCR ON / OFF
Main Menu
Picture
Setting
: Select
: Adjust
MENU
: Exit
Menu Operation