Filter
Top Products
43
RS232C Command T
RS232C Command T
ables
ables
Time Read Command Table
Status read command Item
CR PANELH
Status of accumulated lifetime of panel.
The same as CR_LAMPH Command
CR MONH
Status of accumulated lifetime of monitor
The same as CR_PROJH Command
Sound control Read Command Table
Status read command
Item
CR VOLUME
Status of volume value.
CR MUTE
Status of MUTE.
Setting Read Command Table
Status read command Item
CR LANG
Status of Language selection.
CR P-MANE
Status of Power management setting
CR TILE
Status of Tile mode ON/OFF setting
CR TILE-HSETS
Status of Tile mode, the number of Horizontal array.
CR TILE-VSETS
Status of Tile mode, the number of Vertical array.
CR TILE-HLOCAT
Status of Tile mode, the number of Horizontal allocation.
CR TILE-VLOCAT
Status of Tile mode the number of Horizontal allocation.
CR TILE-BZLHADJ
Status of Tile mode, the width of bezel
Horizontal
CR TILE-BZLVADJ
Status of Tile mode, the width of bezel (Vertical)
CR ONPROG
Status of On Program information/
CR WINTERMODE
Status of Winter mode Information.
CR PANELPROTECT
Statuses of Panel protect Information.
CR LEDLIGHT
Status of LED light Information.
CR AVAUTOSHUT
Status of AV auto shut OFF Information.
CR CHILDLOCK
Statuses of Child lock Information.
CR RCINHIBITION
Status of RC Inhibit Information.
Other Read Command Table
Status read command Item
CR STATUS
Status of the operation of the monitor.
CR SIGNAL
Status of with or without signal.
CR FREEZE
Status of Freeze setting.
CR FANLOCK
Statuses of fun lock error.
CR TEMP
Status of current temperature value.
UK5 Read Command Table
(Basic Command)
Command
Item
Note
CR0 Power On, Standby, power error,
CR1 Input Mode AV1, AV2, ..., DVI, PC
CR WIDE Wide mode Auto, Normal, Full, …
CR PICTURE Picture mode Dynamic, Standard, …
CR SIGNAL Signal existence Signal / No signal
CR CHILD Child lock On / Off
CR PSAVE Power save On / Off
CRTM Panel usage time
CR RMC RC inhibition On / Off
CR MDL Model number 52LH1
Error code Table
Error code
Receiving the data that cannot be decoded
The wrong indication of parameter
Wrong figured number, or wrong word is included.
Normal receiving no error
If the command of out of range is directly entered
valuable parameter.
No matching with Hardware
(Command for optional function which is not equipped.)
If the command of “Out of range” is entered by
inclement or decrements by numeric value.
While capturing the picture, no execution. Wait and
transmit command again.
While PIN code is in operation, no execution.
Wait and transmit command again.
The errors not including above.
Downloaded From TV-Manual.com Manuals