Multi Room Audio Amplifier Installation Instructions
16
7 Specifications
560125D/2 Desktop and 560125R/2 Remote
Parameter Description
Supply Voltage 24 V DC @ 3.75 A when using the external
switch mode power supply
27 V d.c. when powered by the Matrix Switcher
(via digital audio connection), refer to the
system level documents
C-Bus supply voltage 15 to 36 V d.c.
C-Bus sink current 22 mA
Power consumption 90 W maximum
Maximum power output
28 W RMS into 4 Ω (0.514% THD)
Frequency response 40 Hz to 20 kHz (±1 dB)
Total harmonic distortion
(1 kHz, 20 W RMS into 4 Ω)
0.36% (using analogue input)
Signal to noise ratio > 67 db (peak, unweighted)
C-Bus network clock and
burden
Software selectable
Analogue input signal level
(Local inputs)
2.8 V p-p maximum (47 k Ω)
D/A conversion 16 bit PCM
Operating temperature Desktop Amp.: 10 to 40 °C (50 to 104 °F)
Remote Amp.: 10 to 70 °C (50 to 158 °F)
Operating humidity 10 to 90% RH (non-condensing)
Dimensions (H x W x D) 74 mm x 180 mm x 215 mm, Desktop
71 mm x 175 mm x 212 mm, Remote