Filter
Top Products
Connecting an exter-
nal amplifier
When you connect an external amplifier
to RCA connectors, please install accord-
ing to the amplifier manual.
Using the Steering
Controller
In vehicles equipped with one, you
can use the steering controller to
operate this product.
Operation button names and functions
7 Volume buttons (ª , ·)
Press ª to raise the volume level.
Press · to lower the volume level.
7 Mode selection button (MODE)
• When power to this product is OFF:
Press the button and power switch-
es ON.
• When power to this product is ON:
Each time you press the button the
*source changes. If you continue
pressing the button for an extended
period, power to this product switch-
es OFF.
*The source switches in the follow-
ing order:
FM1 = FM2 = CD(MP3/WMA/AAC)
= (iPod) = (AUX) = AM = (SAT1)
= (SAT2) = (SAT3) = FM1
34
NOTICE
• The output of an internal
amplifier will not stop even
when an external amplifier
is connected the RCA output.
When cutting off the inter-
nal amplifier output cable,
protect the cut surface to
prevent short circuits.
• Subwoofer output of this
unit is monaural. The output
level cannot be adjusted
with FAD/BAL on the AUDIO
Menu.
• Beeps will not be audible if
an external amplifier is con-
nected to the Front output.
CAUTION
• A standard speaker's input
is rated 20 W input (largest
50 W input).
When an amplifier is con-
nected to the RCA output,
make sure to change the
speaker that corresponds to
the output.
If you connect to a standard
speaker, this may cause to
catch fire, emit smoke, or
cause damage.
Subwoofer output Rear output Front output