Sharp GX-BT3 Car Speaker User Manual


 
E-1
Accessories
The following accessories are included.
MUTE
ON
/
ST
AND-BY
TREBL
E
A
UDIO IN
BAS
S
PA
IRIN
G
VO
L
X-BAS
S
BLUE
TO
OT
H
DIMMER
RRMCGA343
AW
01
ECO MODE
GX-BT3
Remote control x 1
(RRMCGA343AW01)
NFC tag x 2
Velcro tape
(hook type) x 2
Velcro tape
(loop type) x 3
General
Please ensure that the equipment is positioned in a well
ventilated area and ensure that there is a free space
along the sides, top and back of the equipment as be-
low.
30 cm (12”) 30 cm (12”) 10 cm (4”)
10 cm (4”)
Gap
Do not obstruct the gap when turning off the unit.
Use the unit on a firm, level surface free from vibration.
Place the unit at least 30 cm (12”) away from any CRT
TV to avoid colour variations across the TV screen. If
the variations persist, move the unit further away from
the TV. LED, plasma and LCD TV are not prone to such
variation.
Keep the unit away from direct sunlight, strong mag-
netic fields, excessive dust, humidity and electronic/
electrical equipment (home computers, facsimiles, etc.)
which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 60°C (140°F) or to extremely low tempera-
tures.
Page
General Information
Precautions ................................................................1 - 2
Controls and indicators ..............................................2 - 3
Preparation for Use
Power Source ..................................................................4
Remote control ................................................................4
Basic Operation
General control ............................................................... 5
Bluetooth
Bluetooth one touch connection via NFC ....................... 6
Listening to Bluetooth enabled devices .....................7 - 8
CONTENTS
Page
Advanced Features
Connecting other equipment ..........................................9
References
Troubleshooting chart ................................................9-10
Maintenance .................................................................10
Specifications ...............................................................10
Precautions
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental aspects
of battery disposal.
This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
The apparatus is designed for use in moderate climates.
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
ENGLISH