Filter
Top Products
E-8
EN
Listening to Bluetooth enabled devices
(continued)
Listening to the sound■
Check that:
The source device Bluetooth functionality is ON.
Pairing of this unit and the source device is completed.
Unit is in connected mode (pairing indicator (BLUE) lights
up.)
Press the ON/STAND-BY button to turn the power on.1
Press the BLUETOOTH button on the remote control or
FUNCTION button repeatedly on the main unit to select
Bluetooth function.
2
Start the Bluetooth connection from the Bluetooth
stereo audio source device.
3
Playback will start automatically, otherwise press play
(on remote control or source device).
Notes:
For various Bluetooth operations, refer “NFC con-
nection for audio playback” on page 6.
If the source device has an extra bass function or
equalizer function, set them to off. If these functions
are on, sound may be distorted.
4
●
●
Notes:
Make the Bluetooth connection again if the source device
is not turned on, or its Bluetooth functionality is off or is in
sleep mode.
●
●
●
●
To disconnect the Bluetooth device■
Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source
device.
Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
Auto power on■
During Bluetooth stand-by mode, the unit will automatically
power on when the Bluetooth connection has been set up
between the main unit and your device.
Note:
This function is not applicable during Eco mode.