Filter
Top Products
E-10
EN
Troubleshooting chart (continued)
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power
on again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Factory reset, clearing all memory
1 Press the AUDIO IN (remote control) or FUNCTION
button repeatedly (main unit) to select AUDIO IN
function.
2 Press / button.
3 Within 1 second, press and hold button until
PAIRING indicator lights up.
PAIRING
Caution:
This operation will restore the unit to factory default
condition.
Before transporting the unit
Caution:
Remove all devices plugged in to the unit. Then, set the
unit to the power stand-by mode. Transporting the unit
with other devices plugged in might damage the units.
Maintenance
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a di-
luted soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nomi-
nal values of production units. There may be some devia-
tions from these values in individual units.
General
Power source AC 100 - 240 V ~ 50/60 Hz
Power
consumption
AC: Power on: 5 W
Power stand-by: 0.4 W (*)
Dimensions Width: 446 mm (17 - 9/16’’)
Height: 155 mm (6 - 1/8”)
Depth: 154 mm (6 - 1/16”)
Weight 2.5 kg (5.5 lbs.)
Frequency band 2.400 GHz - 2.480 GHz
Compatible
Bluetooth Profile
A2DP (Advanced Audio
Distribution Profile), AVRCP (Audio/
Video Remote Control Profile)
Bluetooth 2.1 +EDR
( * ) This power consumption value is obtained when the
Bluetooth stand-by mode is cancelled in the power
stand-by mode. Refer to page 4 to cancel the Blue-
tooth stand-by mode.
Amplifier
Output power Front speaker:
RMS: 10 W (5 W + 5 W) (10%
T.H.D.)
RMS: 7 W (3.5 W + 3.5 W) (1%
T.H.D.)
Subwoofer:
RMS: 10 W (10% T.H.D.)
RMS: 8 W (1% T.H.D.)
Input terminals Audio In (audio signal):
500 mV/47 k ohms
Speaker
Type 2-way type speaker system
Front Speakers:
5 cm (2”) - 3 Ω - Full Range
Subwoofer: 8 cm (3-1/8”) - 6 Ω
- woofer
Maximum input
power
Front Speakers: 10 W / Channel
Subwoofer: 10 W / Channel
Rated input
power
Front Speakers: 5 W / Channel
Subwoofer: 5 W / Channel