Sharp PN-S655 Car Video System User Manual


  Open as PDF
of 112
 
ENGLISH
9
E
How to Install the Monitor
Mounting precautions
• Sincethemonitorisheavy,consultyourdealerbefore
installing, removing or moving the monitor.
• Wheninstalling,removingormovingthemonitor,ensure
that this is carried out by at least 2 people.
• Whenmovingthemonitor,besuretoholditwiththe
handles both on the rear and the unit bottom. Do not hold
the LCD panel. This may cause product damage, failure, or
injury.
• Installthemonitorwiththesurfaceperpendiculartoalevel
surface. If necessary, the monitor may be tilted up to 20
degrees.
• Mountingthemonitoronthewallrequiresspecialexpertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Thismonitorshouldbeusedatanambienttemperature
between 32°F (0°C) and 104°F (40°C). Provide
enough space around the monitor to prevent heat from
accumulating inside.
U
n
i
t:
i
nc
h
[
cm
]
1-3/8 [3.5]
1-
15/16
[5]
1-
15/16
[5]
1-15/16 [5]
11-13/16 [30]
• Ifitisdifficulttoprovidethismuchspaceforanyreason
such as the installation of the monitor inside a housing, or if
the ambient temperature may be outside of the range of 32
°F (0°C) to 104°F (40°C), install a fan in the housing or take
other measures to keep the ambient temperature within the
required range.
• Donotblockanyventilationopenings.Ifthetemperature
inside the monitor rises, this could lead to a malfunction.
• Aftermounting,itisrecommendedtotakesomemeasures
to prevent the monitor from falling down. Secure the
monitor by fastening the hooks at the top of the monitor to a
wall or a pillar with strong cord and brackets (not included).
• Donotplacethemonitoronadevicewhichgeneratesheat.
• Thismonitorisxedtothetemporarystandwhenshipped
from the factory. Please note that this stand is for temporary
use only until the monitor is properly mounted.
• Besuretouseastandorawall-mountbracketdesignedor
designated for mounting the monitor.
• Thismonitorisdesignedtobeinstalledonaconcretewall
or pillar. Reinforced work might be necessary for some
materials such as plaster / thin plastic board / wood before
starting installation.
This monitor and bracket must be installed on a wall which
can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material
and the structure.
 previous next