Sharp XL-UH220H Car Stereo System User Manual


 
12
XL-UH220H
Basic Operation
General control
To turn the power on
Press the ON/STAND-BY button to turn the power on.
Illumination light control
When the power is turned on, ring around the volume control light
up. To turn on/off the light, hold down the CLEAR/DIMMER button
on the remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra
bass mode, press the X-BASS/DEMO
button on the remote control
.
Equaliser
When the EQUALIZER MODE button on the remote control is
pressed, the current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button repeatedly
until the desired sound mode appears.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
30 MAXIMUM0
.....
ROCK For rock music.
FLAT No equalisation.
CLASSIC For classical music.
POPS For pop music.
JAZZ For jazz.
VOCAL Vocals are enhanced.