Sharp XL-UH220H Car Stereo System User Manual


 
36
XL-UH220H
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Auto power on function (USB/AUX):
When you press any of the following buttons, the unit turns on.
VIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the "USB" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the
television.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT
RIGHT LEFT
VIDEO/AUX IN
SPEAKERS
LEFT
ANTENNA
FM
75 OHMS
AM
GND
SUBWOOFER
PRE-OUT
RIGHT LEFT
VIDEO/AUX IN
1 Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the VIDEO/AUX/USB (USB/AUX) button.
4 Play the connected equipment.