Sharp XL-UH4H Car Stereo System User Manual


 
24
XL-UH4H
USB Memory Playback
To remove USB memory device
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory’s format support FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If "NO SONG" is displayed, it means "Copyright protected WMA
file" or "Not supported playback file" is selected.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
The larger the capacity of the USB storage device, the longer it will
take for the data to be read.
Some USB multi-reader devices may not work correctly with the
USB terminal on this unit.
External storages devices cannot be played back using the USB
terminal on this unit.
Listening to SD mass storage
device / MP3 player
Note:
This product is not compatible with MTP and AAC file systems.
1 Press the STOP button on the remote control or button
on the main unit.
2 Disconnect USB memory device from the USB terminal.
1 Press the USB/SD / button, and push up the USB door.
Connect the SD memory device that has MP3/WMA format
files on the unit.
To select USB or SD function, press and hold the USB/SD /
button for more than 2 seconds.
When the SD memory is connected to the main unit, the device
information will be displayed.
In case in folder mode, proceed to step 2.
In case track is selected, proceed to step 3.
Total number of folders
Total number of tracks
WMA MP3
USB
USB indicator SD indicator