Filter
Top Products
15
Initial use
KH 2377
GB
IE
Initial use
Face plate
To protect against theft you can remove the face plate from your device. Do not
store the removed face plate in your vehicle.
NOTICE
When the face plate is not inserted into the frame the theft protection ►
LED
30
on the device blinks.
To safeguard the face plate always keep it stored in its case. ►
Installing the face plate
Place the face plate with the left side in the
frame fi rst.
Then fi rmly press the right side until it locks into
place.
Subsequently fl ip the face plate upw
ards until it
locks into place.
Check to make sure that the face plate is fi
rmly and
correctly installed in the frame. If the face plate
is incorrectly installed it can result in malfunctions
when operating the device.
Removing the face plate
Press the
6
button to unlock the face plate.
The face plate tilts automatically forward.
Tilt the face plate completely forward.
Slide the face plate to the left and then pull fi rst
the right and then the left side away.