Filter
Top Products
KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 8
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
SELF DIAGNOSIS FUNCTIONS
SELF DIAGNOSIS FUNCTION
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to fl ash. The number
of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the
instruction manual for the user’s knowledge and reference. If an error symptom cannot be reproduced, the remote commander can be used to
review the failure occurrence data stored in memory to reveal past problems and how often these problems occur.
DIAGNOSTIC TEST INDICATORS
When an error occurs, the STANDBY LED will fl ash a set number of times to indicate the possible cause of the problem. If there is more than
one error, the LED will identify the fi rst of the problem areas.
Result for all of the following diagnostic items are displayed on screen.
If the screen displays a “0”, no error has occurred .
Diagnostic
Item
Diagnostic Item
Description
Number of times
Standby LED blinks
Possible Location
RGB_SEN RGB Sensor ACK Error
NA
NA
MAIN_POWE
R
Main Power
Over Voltage Protection
2
GE3A (Power) BOARD (KDL-32EX700/40EX700/40EX703 Only)
GE2B (Power) BOARD (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)
GE2A (Power) BOARD (KDL-60EX700/60EX701/60EX703 Only)
BAL Board
DC_ALERT DC Alert
DTT-WDT DTT Error
AUD_PROT Audio Error Detection
BALANCER Panel Balancer Error
4
BAL Board
TCON ERR TCON Error
HFR ERR HFR Error
P_ID_ERR Panel ID NVM Error
BACKLITE Backlight Error
6
BAL Board
TEMP_ERR Temperature Error BAL Board
FAN_ERR
Fan Error
(Not Used in these models)
NA
7
3
5
BAL Board
GE3A (Power) BOARD (KDL-32EX700/40EX700/40EX703 Only)
GE2B (Power) BOARD (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)
GE2A (Power) BOARD (KDL-60EX700/60EX701/60EX703 Only)
BAL Board
LCD Panel
TCON Control MT Board
Self Diagnosis
Supported model