Sony 32EX700 Car Satellite TV System User Manual


 
KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 16
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identi es per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero speci e.
NOTE: The components identi ed by shading
and
!
mark are critical for safety. Replace only
with part number speci ed.
NOTE: The components identi ed by a red outline and a mark contain
con dential information. Speci c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
A
Remove screws from Power Boards
4 from GE3-A Board (KDL-32EX700/40EX700/40EX703 Only)
4 from GE2-B Board (KDL-46EX700/46EX701/46EX703/52EX700/52EX701/52EX703 Only)
5 from GE2-A Board (KDL-60EX700/60EX701/60EX703 Only)
B
Disconnect 5 connectors from Power Boards
C
Remove 4 screws from BAL Board
D
Disconnect 5 connectors from BAL Board
E
Slide Side Jack Bracket to right-side to remove from BAL Board
F
Lift HMS2 Board to detach from Bezel
G
Slide-out Lens to detach from Bezel
H
Carefully Lift up Panel to remove from Bezel
1-4. GE3-A/GE2-A/GE2-B (POWER) BOARDS, BAL BOARD, HMS2 BOARD,
AND LCD PANEL REMOVAL
151 X-2541-866-1 BEZEL(32) ASSY
(KDL- 32EX700 ONLY)
151 X-2541-867-1 BEZEL(40) ASSY
(KDL- 40EX700 ONLY)
151 X-2547-169-1 BEZEL(40) ASSY
(KDL- 40EX703 ONLY)
152 A-1736-860-A HMS2 BOARD, MOUNTED
153 1-856-068-11 LENS
154 N/A LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
155 4-171-117-01 BRACKET, SIDE JACK M
156 A-1763-462-A BAL BOARD, COMPLETE
NOTE: For BAL Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BAL Board or LCD Panel.
NOTE: Final software is not installed on this BAL Board. Install the update
after replacing this board using the instructions provided with the software.
157 1-474-213-11 GE3-A (POWER) BOARD, COMPLETE
157
156
155
152
153
151
154
A
B
D
E
G
F
H
C
1-4-1. KDL-32EX700/40EX700/40EX703
2-580-592-01 SCREW, +PSW M3X8