Sony CDX-GT500EE Car Stereo System User Manual


  Open as PDF
of 59
 
6
CDX-GT50W/GT500/GT500EE/GT550
• CDX-GT500EE
• CDX-GT550
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B Volume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
C Receptor for the card remote
commander
D BTM button 8
To start the BTM function (press and hold).
E Display window
F DSO button 2
To select the DSO mode (1, 2, 3 or off). The
larger the number, the more enhanced the
effect.
G OPEN button 5
CDX-GT550
RESET
ql waw;
7
H GP*
1
/ALBM*
2
+/– buttons*
3
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
I SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J DSPL (display) button 8
To change display items.
K SENS button
To improve weak reception: Local/Mono.
L SOURCE button
To power on; change the source (Radio/CD/
MD*
4
/AUX).
M MODE button 8, 10
To select the radio band (FM/AM)/select the
unit*
5
.
N SCRL (scroll) button
To scroll display item.
O Frequency select switch (located on the
bottom of the unit)
See “Frequency Select switch” in the
supplied installation/connections manual.
P Number buttons
CD/MD*
4
:
(3): REP 8, 10
(4): SHUF 8, 10
(5): BBE MP*
6
2
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q EQ3 (equalizer) button 9
To select an equalizer type (Xplod, Vocal,
Edge, Cruise, Space, Gravity, Custom or
Off).
R IMAGE button 2
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Space Producer mode t Wall
paper mode 1-3 t Normal play/reception
mode
S RESET button 4
T Z (eject) button 5
To eject the disc.
U Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
ws < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
wd VOL (volume) +/– button
To adjust volume.
wf ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wg SEL (select) button
The same as the select button on the unit.
wh M (+)/m (–) buttons
To control CD, the same as (GP/ALBM) +/–
on the unit.
wj Number buttons
To receive stored stations (press); store
stations (press and hold).
*1
When an ATRAC CD is played.
*2
When an MP3/WMA is played.
*3
If the changer is connected, the operation is
different, see page 10.
*4
When an MD changer is connected.
*5
When a CD/MD changer is connected.
*6
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
6
Location of controls and basic operations
Main unit
Front panel removed
Card remote commander
RM-X151
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
A OFF button
To power off; stop the source.
B Vo lume control dial/select button 9
To adjust volume (rotate); select setup items
(press and rotate).
C Receptor for the card remote
commander
D BTM button 8
To start the BTM function (press and hold).
E Display window
F DSO button 2
To select the DSO mode (1, 2, 3 or off). The
larger the number, the more enhanced the
effect.
G OPEN button 5
CDX-GT500EE
RESET
ql w;qk
7
H GP*
1
/ALBM*
2
+/– buttons*
3
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
I SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J DSPL (display) button 8
To change display items.
K SENS button
To improve weak reception: Local/Mono.
L SOURCE button
To power on; change the source (Radio/CD/
MD*
4
/AUX).
M MODE button 8, 10
To select the radio band (FM/AM)/select the
unit*
5
.
N SCRL (scroll) button
To scroll display item.
O Number buttons
CD/MD*
4
:
(3): REP 8, 10
(4): SHUF 8, 10
(5): BBE MP*
6
2
To activate the BBE MP function, set
“BBE MP on.” To cancel, set “BBE MP
off.”
(6): PAU SE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
P EQ3 (equalizer) button 9
To select an equalizer type (Xplod, Vocal,
Edge, Cruise, Space, Gravity, Custom or
Off).
Q IMAGE button 2
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Space Producer mode t Wall
paper mode 1-3 t Normal play/reception
mode
R RESET button 4
S Z (eject) button 5
To eject the disc.
T Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
ws VOL (volume) +/– button
To adjust volume.
wd ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wf SEL (select) button
The same as the select button on the unit.
wg M (+)/m (–) buttons
To control CD, the same as (GP/ALBM) +/–
on the unit.
wh Number buttons
To receive stored stations (press); store
stations (press and hold).
*1
When an ATRAC CD is played.
*2
When an MP3/WMA is played.
*3
If the changer is connected, the operation is
different, see page 10.
*4
When an MD changer is connected.
*5
When a CD/MD changer is connected.
*6
When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery of the card remote
commander” on page 13.
 previous next