Filter
Top Products
40
DSR Series
DATA No.0/BIT-0 : LOCAL
BIT-0 will be set to “1” when the REMOTE/LOCAL switch on the front panel is set to
“LOCAL”.
DATA No.1
DATA No.1/BIT-7 : STANDBY
BIT-7 will be set to “1” when the DEVICE is the STANDBY ON mode.
DATA No.1/BIT-6 : TENSION RELEASE
BIT-6 will be set to “1” when the DEVICE is the TENSION RELEASE mode.
DATA No.1/BIT-5 : STOP
BIT-5 will be set to “1” when the DEVICE receives the “20.00 : STOP” command and goes
into the STOP mode.
DATA No.1/BIT-4 : EJECT
BIT-4 will be set to “1” when the DEVICE receives the “20.0F : EJECT” command and goes
into the EJECT mode.
DATA No.1/BIT-3 : REW
BIT-3 will be set to “1” when the DEVICE receives the “20.20 : REWIND” command and
goes into the REWIND mode.
DATA No.1/BIT-2 : F.FWD
BIT-2 will be set to “1” when the DEVICE receives the “20.10 : FAST FWD” command and
goes into the FAST FORWARD mode.
DATA No.1/BIT-1 : REC
BIT-1 will be set to “1” when the DEVICE receives the “20.02 : REC” command and goes
into the REC mode.
BIT-1 will be also set to “1” when “DATA No.4/BIT-4 EDIT” is set to “1”.
DATA No.1/BIT-0 : PLAY
BIT-0 will be set to “1” when the DEVICE receives the “20.01 : PLAY”, “20.02 : REC” or
“20.65 : EDIT ON” command and goes into the PLAY, REC or EDIT mode.
DATA No.2
DATA No.2/BIT-7 : SERVO LOCK
BIT-7 will be set to “1” when the DEVICE is in the condition that the drum and the capstan
servos are locked in the PLAY mode.
DATA No.2/BIT-6 : TSO MODE
BIT-6 will be set to “1” when the DEVICE is in the CAPSTAN OVERRIDE mode.
DATA No.2/BIT-5 : SHUTTLE
BIT-5 will be set to “1” when the DEVICE receives the “2X.13 : SHUTTLE FWD” or
“2X.23 : SHUTTLE REV”, and goes into the SHUTTLE mode.