Filter
Top Products
72
DSR Series
7-3. Items supported from DSR-DR1000/A disk command V2.00
1. Open Play Command supporting ENDLESS MODE
In V2.00 or later, by setting ENDLESS MODE that exists in the Option of the Open Play Command, an
opened file can be played back repeatedly.
Description of Open Play Commands is as follows:
Item Size Value Description
DC 1 0xXX Data Count
CMD1 1 0x16 Command1
CMD2 1 0x00 Command2
DATA1 1 0xXX PORT ID
DATA2 1 0xXX OPTION
DATA3 1 0xXX DRIVE ID
DATA4 n 0xXX FILE NAME
DATA5 3 0xXX CHANNEL BITMAP 1
0xXX CHANNEL BITMAP 2
0xXX CHANNEL BITMAP 3
DATA6 4 0xXX START TIME CODE (Frames)
0xXX START TIME CODE (Seconds)
0xXX START TIME CODE (Minutes)
0xXX START TIME CODE (Hours)
DATA7 4 0xXX DURATION (Frames)
0xXX DURATION (Seconds)
0xXX DURATION (Minutes)
0xXX DURATION (Hours)
PORT ID : The DSR-DR1000/A ignores this value.
OPTION : Specify Option by bit.
DRIVE ID : Set as 0x00.
FILE NAME : Specify a playlist or a CLIP to be opened.
CHANNEL BITMAP : Ignored in the DSR-DR1000/A.
START TIME CODE : Four-byte, BCD-format TIMECODE data.
DURATION : Ignored in the DSR-DR1000/A.
The setting of the Option described above is as follows:
BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
0(*4) 0 (*3) (*2) (*1)