Sony KDL-70X830B Car Satellite TV System User Manual


 
C:\Users\CHAILING_2\Desktop\Clover FullSet\SY140222_Clover 67 (Rev-
4)\4533569141_US\US03STU.fm
XBR-70/65/55/49X850B/65/55X800B/KDL-70X830B/65X830B/55X830B
4-533-569-14(1)
9
US
US
x Guidelines for IR Remote Control
Point your remote control directly at the
IR sensor located on your TV.
Make sure that no objects are blocking
the path between the remote control and
the IR sensor on your TV.
Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
If you are having problems with the
remote control, reinsert or replace your
batteries and make sure that they are
correctly inserted.
Before setting up
your TV
Some TV models are packaged with a
detached Table-Top Stand so you can
mount your TV to a wall right away. See
page 38 (Installing the TV to the Wall) if you
want to mount the TV to a wall. If you are not
mounting the TV to a wall, you will need to
attach the Table-Top Stand. You will need a
Phillips screwdriver (not supplied) and the
supplied screws to complete the task. Look
for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while
setting up your TV:
Disconnect all cables when carrying the
TV.
Carry the TV with the adequate number
of people; larger size TVs require two or
more people.
Correct hand placement while carrying
the TV is very important for safety and to
avoid damage.
Ensure your TV has adequate ventilation,
see page 39.
For best picture quality, do not expose
the screen to direct illumination or
sunlight.
Avoid installing the TV in a room with
reflective wall and floor materials.
Avoid moving the TV from a cold area to
a warm area. Sudden room temperature
changes may cause moisture
condensation. This may cause the TV to
show poor picture and/or poor color.
Should this occur, allow moisture to
evaporate completely before powering
the TV on.
(Continued)