Sony KV-27FS100 Car Satellite TV System User Manual


 
13
Operating Instructions
Connecting a TV, Satellite Receiver, and VCR
1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3 Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on
your TV.
4 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to
AUDIO/VIDEO IN on your VCR.
5 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing on the remote control.
1
3
4
Audio R (red)
Audio L (white)
2
From
cable/
antenna
3
Satellite Receiver
1
4
5
Video (yellow)
VCR
Rear of TV