Sony KV-27FS100 Car Satellite TV System User Manual


 
Using the Menus
35
Using the Timer Menu
Current Time Set your TV to the current day and time. Press
to open Current Time menu:
1
Use the
F
or
f
buttons to enter the correct day and time, then press .
2 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
Use the timers to program your TV to turn on and off by day, time, duration and
channel. The timers duration is maximum of 6 hours. When the channel is fixed,
it is not necessary to set the channel.
1 Use the F or f
buttons
to select Timer 1 or Timer 2, then press .
2 Use the F or f
buttons
to enter the desired day, start time, duration, and
channel, then press . The timer status should be On when the Timer
has been set, and the timer light on the front panel of the TV should be
turned on.
3 Press to exit the menu.
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
To access the Timer menu, refer to the following steps:
To Display To Highlight To Select
Timer 1 : Off
Timer 2 : Off
:
AM
Video Audio Channel Parent Timer Setup Basic
Current Time
Program the time
Program
Move:
Select:
End:
You must set the Current Time before you can use Timer 1 or Timer 2.
Select Off to turn off the Timer (your previous settings will be saved).