Sony KV-32FS100 Car Satellite TV System User Manual


 
Connecting Your TV
12
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video
cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
Connecting a TV and Satellite Receiver
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.
3 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to
AUDIO/VIDEO IN on your TV.
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide
sound; you still must connect the audio cables.
You can use the button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide
sound; you still must connect the audio cables.
1
3
4
Satellite Receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV