Filter
Top Products
© 2006 Sony Corporation. All rights reserved.
Reproduction in whole or in part without permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Images on monitors are simulated.
Sony is a registered trademark of Sony Corporation.
CA LMD-1950MD/GB- /01/2006
PICTURE PERFORMANCE
LCD Panel Type a-Si TFT Active Matrix LCD with an AR-coated
protection panel
Resolution 1280 x 1024 dots (SXGA)
Picture Size Approx. 376 x 301 mm (14 7/8 x 11 7/8 inches)
(H x W) (Diagonal) Diagonal 482 mm (19.1 inches)
Aspect 5:4
Viewing Angle 89°/89°/89°/89°(typical) (up/down/left/right contrast>10:1)
INPUT / OUTPUT
Input Composite BNC (x 1)
1.0 Vp-p ±3 dB, sync negative
Y/C 4pin Mini DIN (x 1)
Y: 1.0 Vp-p ±3dB, sync negative
C: 0.286 Vp-p ±3dB (NTSC) / 0.3 Vp-p ±3dB (PAL)
Component/RGB BNC (x 3)
Component Y: 1.0 Vp-p ±3 dB
Pb, Pr: 0.7 Vp-p ±3 dB
RGB G: 0.7 Vp-p ±3 dB, Sync on G 0.3 Vp-p
B: 0.7 Vp-p ±3 dB
R: 0.7 Vp-p ±3 dB
Ext. Sync BNC (x1)
0.3 ~ 4 Vp-p ±bipolarity ternary or negative polarity binary
Computer DVI-D: TMDS (Single Link)
HD15 Analogue RGB: HD D-sub15pin (female);
0.7 Vp-p, 75 Ω sync positive (R, G, B)
Remote Parallel Modular 8 pin (Assignable)
Serial RS-232C (serial remote), D-sub 9-pin
Output Composite BNC (x 1), Loop-through, automatic 75 Ω termination
Y/C 4 pin Mini DIN (x 1), Loop-through, automatic 75 Ω
termination
Component/RGB BNC (x 3), Loop-through, automatic 75 Ω termination
Ext. Sync BNC (x 1), Loop-through, automatic 75 Ω termination
GENERAL
Power Consumption Maximum: Approx. 66 W (with 2 x BKM-229X)
Standard: Approx. 59 W (without optional input adaptor)
Power Requirement DC 24 V 2.8 A, AC 100 to 240 V ±10%, 50/60 Hz
Operating Temperature 0 to 40 °C (32 to 104 °F)
Operating Humidity 30 to 85 % (no condensation)
Storage & Transport Temperature -20 to 60 °C (-4 to 140 °F)
Storage & Transport Humidity 0 to 90 % (no condensation)
Operating / Storage / Trans. Pressure 700 hPa to 1060 hPa
Dimensions (W x H x D)(inches) 442 x 403 x 118 (17 1/2 x 15 7/8 x 4 3/4)
Mass 9.7 Kg (21 lb 6 oz) with 2 x BKM-229X
Supplied Accessories AC adaptor,AC power cord,AC plug holder (2), DC cable,
Instructions for Use, CD-ROM,Warranty Card, Using
the CD-ROM Manual,Quick Reference, “When you first
use the monitor” booklet, Sales Companies Guide
Optional Accessories BKM-227W: NTSC/PAL Input Adaptor
BKM-229X: Analogue Component Input Adaptor
BKM-220D: SDI 4:2:2 Input Adaptor
BKM-243HS: HD-SDI & SDI Input Adaptor
SU-560: Monitor Stand
274 (10 7/8)
100 (4)
100 (4)
210 (8 3/8)
185 (7 3/8)218 (7 5/8)
287 (11 3/8)
125 (5)
403 (15 7/8)
303 (12)
442 (17 1/2)
379 (15)
302 (12)
118 (4 3/4)
28°
195 (7 3/4)
44 (1 3/4)
1 I/O (Power) switch
2Tally Lamp
3APA (Auto Pixel Alignment)
key
4 (brightness) +/- keys
5 (contrast) +/- keys
6 MENU key
7Arrow keys ( )
8 ENTER key
9 USER MEMORY key
!º INPUT / key
!¡ (key inhibit) indicator
!™ REMOTE indicator
!£ POWER indicator
3
2
1
4567 89
!º
!¡
!™
!£
1COMPOSITE connector
(BNC)
2Y/C connector (4-pin
mini-DIN)
3G/Y connector (BNC)
4 B/P
B connector (BNC)
5 R/P
R connector (BNC)
6EXT SYNC (external sync)
connector (BNC)
7 Optional input slots
8 (equipotential/
function ground) terminal
9 DC IN socket
!ºLoop-through output
connectors
!¡DVI input connector (DVI-D)
!™HD15 input connector
(HD D-Sub 15 pin)
!£PARALLEL REMOTE
terminal (modular
connector,8 pin)
!¢RS-232C (serial remote)
connector (D-Sub 9 pin)
8 1 2 3456 7
9
!º !¡ !™ !£ !¢
LMD-1950MD Specifications
Dimensions Unit: mm (inches)
Front Panel
Connector Panel