Filter
Top Products
21
0dB
D.BASS-3
D.BASS-2
D.BASS-1
D.BASS-3
D.BASS-2
D.BASS-1
Changing the sound and
display settings
The following items can be set:
SET (setting)
•CLOCK (page 8)
•BEEP — to turn the beeps on or off.
•RM (Rotary Commander) — to change the
operative direction of the controls of the
rotary commander.
— Select “NORM” to use the rotary
commander as the factory-set position.
— Select “REV” when you mount the rotary
commander on the right side of the
steering column.
DIS (display)
•D.INFO (Dual Information) — to display the
clock and the play mode at the same time
(ON).
•AMBER/GREEN*
1
— to change the
illumination color to amber or green.
•M.DSPL (Motion Display) — to turn the
motion display on or off.
•A.SCRL (Auto Scroll) (page 10)
P/M
•HPF (High pass filter for the pre-output)*
2
—
to select the roll off frequency of the pre-
output.
•SUB LPF (Low pass filter for the subwoofer
output)*
2
— to select the roll off frequency of
the subwoofer output.
*
1
CDX-C5005 only
*
2
CDX-C7000X only
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.
1 Press (MENU).
2 Press either side of (DISC/PRST) repeatedly
until the desired item appears.
Each time you press the (–) side of
(DISC/PRST), the item changes as follows:
CLOCK t BEEP t RM t D.INFO t AMBER/
GREEN*
1
t M.DSPL t A.SCRL*
2
*
1
CDX-C5005 only
*
2
When no CD or MD is playing, this item will
not appear.
Note
The displayed item will differ depending on
the source.
Level
Frequency (Hz)
Tip
You can easily switch among categories (“SET”,
“DIS”, “P/M” (play mode), and “EDT” (edit
mode)) by pressing either side of (DISC/PRST)
for two seconds.
3 Press the (+) side of (SEEK/AMS) to select
the desired setting (Example: ON or OFF)
or press either side of (SEEK/AMS)
repeatedly to select the frequency
(Example: off, 80 Hz, 120 Hz).
4 Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Boosting the bass sound
— D-bass
You can enjoy a clear and powerful bass
sound.
The D-bass function boosts the low and high
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS button.
Adjusting the bass curve
Press (D-BASS) repeatedly until the
desired bass level (1, 2, or 3) appears in
the display.
To cancel, select “D.BASS-OFF.”
Note
If the bass sound becomes distorted, select a less
effective setting of “D.BASS” or adjust the volume.