Filter
Top Products
16
EN
Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the item changes as follows:
Labeling a CD — Disc Memo
(CD unit with custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 17) and select the specific
tracks for playback (page 17).
1 Play the CD and press (LIST) for two
seconds.
2 Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial counterclockwise,
the characters appear in reverse order.
If you want to enter a blank space
between characters, select “_” (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3 To return to the normal CD playback
mode, press (LIST) for two seconds.
Tip
To erase/correct a name, enter “_” (under-bar) for
each character.
Erasing the disc memo
1 Select the CD unit (page 14).
2 Press (LIST) for two seconds.
3 Press (DSPL) for two seconds.
4 Rotate the dial to select the name that
you want to erase.
5 Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6 Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
$
Elapsed playback time
$
Disc memo name
$
Track name*
1
$
Clock
$
MOTION DISPLAY*
2
*
1
If you connect an optional CD unit with the CD
TEXT function, the CD TEXT information will
appear on the display when you playback a CD
TEXT disc.
*
2
All the items above are scrolled in the display
one by one in order.
DISC
DISC
DISC
DISC