Filter
Top Products
7
EN
Getting Started/MD Player
Changing the displayed items
Each time you press (DSPL), the item changes
as follows:
$
Elapsed playback time
$
Disc name*
1
$
Track name*
2
$
Clock
$
MOTION DISPLAY*
3
*
1
If there is no prerecorded title for a disc “NO
D.Name” will appear on the display.
*
2
If a track title is not prerecorded, “NO T.Name”
will be displayed.
*
3
All the items above are scrolled in the display
one by one in order.
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 10 characters and the Auto Scroll
function is on, automatically scrolls on the
display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
• The disc or track name appears depending on
the setting when you press (SOURCE) to select
an MD.
If you press (DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1 During playback, press (SHIFT).
2 Press (2) (SET UP) repeatedly until
“A.Scrl” appears.
3 Press (4) (n) to select “A.Scrl on”.
4 Press (SHIFT).
To cancel Auto Scroll, select “A.Scrl off” in
step 2 above.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) momentarily.
Locating a specific point in a track
— Manual Search
During playback, push the (SEEK/AMS)
control up or down and hold. Release
when you have found the desired point.
Note
If “
” or “ ” appears in the
display, that means you have reached the
beginning or the end of the disc and you cannot
go any further.
To search forward
To locate succeeding tracks
To locate preceding tracks
To search backward
SEEK/AMS
SEEK/AMS