Filter
Top Products
7
Operation for playback
To Do this
Stop playback Press x*
1
Eject the disc Open the front panel,
then press Z on the
unit.
Pause Press u *
2
Resume playback Press u
after pause
Go to the next chapter, Press >
track, or scene in
continuous play mode
Go back to the preceding Press .
chapter, track, or scene in
continuous play mode
Fast forward Press M/y while
playing*
3
*
4
Fast reverse Press /m while
playing*
3
*
4
Slow forward Press M/y in
(DVD/Video CD only) pause*
4
Slow reverse Press /m in
(DVD only) pause
*
1
If the resume playback function is activated, you
can resume playback later by pressing u. For
details, see “Resuming playback.”
*
2
DVD/Video CD
Both the picture and sound stop during pause
and “PAUSE” is displayed on the screen.
Audio CD
The sound stops and “PAUSE” is displayed on
the screen.
*
3
DVD/Video CD/Audio CD
Playback increases to 4 times the speed with
no sound.
*
4
A disc other than a DVD returns to normal
playback when a track/MP3 file finishes.
Notes
• Depending on the recording method used on the
disc, it may take a minute or more before
playing.
• Depending on the condition of the disc, it may
not play back (page 38).
• If you play a high-bit rate MP3 file such as 320
kbps, sound may be intermittent.
Returning the display monitor to its
enclosure
Close the display monitor until it clicks. The
monitor turns off automatically.
Notes
• Be careful not to catch your finger in the display
monitor when closing.
• Do not put any foreign objects between the LCD
panel and the enclosure when closing.
Adjusting the tilt and swivel
The display monitor can be adjusted within the
angles shown.
Tip
Before closing the display monitor, make sure that
the monitor is turned and facing the enclosure
(you will hear a click).
30˚
180˚
120˚
ENTER
SEARCH
POWER
DISPLAY
CLEAR
SETUP
AUDIO
ANGLE
SUBTITLE
MENU
TOP MENU
INPUT
MONITOR
POWER
123
456
7890
VOL
./>
u
x
/y
m/M