Filter
Top Products
8
Location of controls
1 OPEN button 6, 12
To open the monitor.
2 Receptor for the card remote
commander/Transmitter for the
cordless headphones
3 UP/DOWN (M/m) buttons 13, 14, 15
To select the desired item.
4 MENU button 14
To adjust the various display settings.
Monitor XVM-R70
* The reverse position of the display monitor.
You can close with the LCD surface out after turning around 180 degrees, and images on the screen
can be turned upside down by pressing (REVERSE) on the monitor. Before closing the display
monitor, make sure that the monitor is turned and facing the enclosure (you will hear a click). Each
time you press (REVERSE) on the monitor, the reverse screen mode switches between on and off.
5 REVERSE button*
To switch images upside down.
6 INPUT button 6, 13
To select the input source.
7 POWER button 6, 12, 13
To turn on/off the player and the
monitor.
REVERSE
180˚
c c
Warning when installing in a
car without an ACC
(accessory) position on the
ignition key switch
To turn off the player and the
monitor, after you set the power
select switch to B (the setting
without ACC position) for your
car (for details, refer to the installation/
connections manual)
There are 3 ways to turn off the
player and the monitor:
— After turning off the ignition, be
sure to press (POWER) on the
monitor.
— After turning off the ignition,
(MONITOR POWER) on the card
remote commander.
— After turning off the ignition, just
close the display panel until it
clicks.
Otherwise, the player and the
monitor do not turn off and this
causes battery drain.