Filter
Top Products
14
13 5 7
24 68
57
4
68
XAV
Connection
box 1
Main unit/
connection box
interconnect 3
Active subwoofer
(optional)
Media Center
main unit
Power supply leads 2
Light blue
Light green (2 m)
Parking brake
switch lead of car
Tap 5
Blue/white
Rotary
Commander
RM-X4S
(optional)
Front speakers
(optional)
Rear speakers
(optional)
RCA interconnects
(optional)
RCA interconnects
(optional)
Max. supply current 0.3 A
Amplifiers
(optional)
A AMP REM
B ATT
Aerial adaptor qh
from car aerial*
C from the car’s speaker connector
D from the car’s power connector
See “Power
connection diagram”
on next page for
details.
1 Purple
2
3 Grey
4
5 White
6
7 Green
8
+ Speaker, Rear, Right
– Speaker, Rear, Right
+ Speaker, Front, Right
– Speaker, Front, Right
+ Speaker, Front, Left
– Speaker, Front, Left
+ Speaker, Rear, Left
– Speaker, Rear, Left
Negative polarity positions 2, 4, 6,
and 8 have striped cords.
C from the car’s speaker connector
D from the car’s power connector
4 Yellow continuous power supply
5 Blue power aerial control
6 Orange/ switched
White illumination power
supply
7 Red switched power supply
8 Black earth
Positions 1, 2, and 3 do not have pins.
A To AMP REMOTE IN of an optional power amplifier
This connection is only for amplifiers. Connecting any other system may damage the unit.
B To the interface cable of a car telephone
Warning
If you have a power aerial without a relay box, connecting this unit with the supplied power
supply leads 2 may damage the aerial.
* Note for the aerial connecting
If your car aerial is an ISO (International Organization for Standardization) type, use
the supplied adaptor qh to connect it. First connect the car aerial to the supplied
adaptor qh, then connect it to the aerial jack of the main unit.
Fuse
(10 A)