Filter
Top Products
20
5 When you finish entering tracks, press
(4) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“**Wait**” appears in the display while the unit
is reading the data, or when a disc has not been
put into the unit.
•“*Mem Full*” appears in the display when you
try to enter more than 24 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
1 Press (SHIFT) then press (4) (PLAY
MODE) repeatedly until “PGM off“
appears.
2 Press (5) (n) repeatedly until “PGM on“
appears.
Programme Play starts.
3 Press (SHIFT).
To return to normal playback mode, select
“PGM off” in step 2 above.
Creating a programme
— Programme Memory (For a CD/MD unit
with the programme memory function)
You can play tracks in the order you want by
making your own programme. You can select
up to 24 tracks for a programme, and store
them in memory.
1 During playback, press (SHIFT), then
press (4) (PLAY MODE) for two seconds.
Programme edit mode
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P ” above.
2 Select the track you want.
1 Press (SOURCE) repeatedly to select
CD or MD.
2 Press (MODE) repeatedly to select the
unit.
3 Press (SHIFT), then press the number
button to select the disc.
4 Press (SHIFT).
5 Push the SEEK/AMS control up or
down to select the track.
3 Press (6) (ENTER).
4 To continue entering tracks, repeat steps
2 and 3.
µ
RLAYMODE
SETUP RLAYMODE ENTER
DISC TRACK
SETUP RLAYMODE ENTER
SETUP RLAYMODE ENTER
DISC TRACK
RLAYMODE
PGM