Filter
Top Products
8
(GB)
Settings
1 Set the POWER switch to ON.
The display shows the same status as before the tuner
was last turned off.
2 Set the CONTROL switch to “1” or “2”.
The tuner to be set is selected.
If the group name and channel number is shown on the
display, skip step 3 and proceed with step 4.
3 Press the MODE button until the group and channel
number appear on the display.
4 Press the SET button.
The group indication starts flashing.
5 Press the + or – button to select the desired group.
Pressing the + button cyclically changes the group in the
following order. Pressing the – button changes it in the
reverse order.
If you hold the button down, the group will continuously
change.
Group setting
Display example for U66 model
Model available in USA
Model available in Europe (CE21)
Model available in Australia